Showing 17–24 of 27 results

PA330 – Multi Function Power Meter

Main Features
  • Power Quality measurement in V/I THD, V/I unbalance, V Eligibility and Min. & Max. Parameters
  • With RS485 and Lonworks (option) communication protocol
Description :
Multi-Function Power Meter is designer for single and three phase power monitoring and measurement. Multi-Function Power Meter provides wide rang of measurements including current, voltage, energy, watt, power factor, watt-hour and frequency, etc. Multi-Function Power Meter also build-in RS485 can easily integrated with most third SCADA system.

DIN 96*96 standard compact size enable PA330 to be easily installed and its low cost and wide flexibility application also made PA330 a good choice for modern power monitoring.


PM3000 – Power Controller

Main Features
  • Power Controller is widely used for power monitoring and control in factory and building.
  • Manage up to 16 units of power meter
  • Rich electricity parameters and power quality display for main and sub-feeder meter
  • Power Controller is easy integrated with 3rd party supervisory control systems
  • Remote power monitoring and control via intranet/internet
  • Electricity demand control with 16 channel load shedding
  • Multi-tariff management with TOU (Time-of-Use rate)
  • Built in web server remote monitoring and control & data download
  • Automatic report and alarm status sending by E-mail
  • Front USB host port for data backup and program download
Description :
A Web-based Mini-SCADA for Power Monitoring, Demand Control and Report Generation
Power Controller is designed for modern industrial sites, commercial facilities and utilities power management. By integration of power monitoring, demand control, power quality analysis, report generation and communication, Power Controller fulfills all daily power management requirements. Power Controller combines the state of art embedded system with information networking technologies, a high performance power supervisory control system can be built at a fairly low cost.

Proximity EM RFID Reader \125KHz EM Card Reader

Main Features
  • Low cost
  • Long read range
  • Small outline
  • Wide voltage range
  • Potted for environmental protection
  • Externally programmable interface
  • Weather resistant

Self Service

Benefit :

1. Transaksi pembelian BBM dapat di lakukan tanpa operator, mudah dan aman.

2. Dilengkapi dengan Bill Acceptor (penerima uang tunia)

3. Menerima pecahan uang tunai mulai Rp. 2000 sampai Rp 100.000

4. Cetak nota dilengkapi barcode atau QRcode


Tiket Printer

Main Features

Embedded adalah bagian dari tiket printer e-print yang menjalin komunikasi data dari dispenser dan komputer master (optional). Perangkat modul embedded adalah:
1. Tombol Keypad Heavy duty industrial grade
2. Layar LCD grafik
3. Reader Mifare Smart Card (optional)
4. Power Supply / Adaptor (mini printer dan modul embedded)

Tyre Inflator

Techinal Data Summary

Dimensions (Height*Width*Depth) 290mm*230mm*120mm
Net Weight 4kg/8.8lbs
Gross Weight 6.5kg/14.3lbs
Packing Size(Height*Width*Depth)170mm*500mm*290mm
Power Requirement 100-240Vac 50/60Hz
Power Consumption 10VA
Operating Temperature Range -20ºC/-4ºF to 70ºC/158ºF
Max Inlet Air/Nitrogen Supply 145PSI/10bar/1000kPa
Operating Range 5-102PSI/0.3-7bar/35-700kPa
Over Pressure Setting Range 0-29PSI/0-2.0bar/0-200kPa
Accuracy ±1PSI/0.07bar/7kPa
Resolution 1PSI/0.1bar/5kPa
Unit of Measurement PSI/bar/kPa


Adjustable OverPressure Setting (OPS)
Auto-start inflation
Automatic zero drift adjustment
Remain at last setting
Comprehensive diagnostics and error reporting
Audible and visual end of the cycle signal indicators
Large backlight LCD display
Vandal resistant mechanical switches
Suits Standard nitrogen bottle/ Direct nitrogen supply from generator/Air Compressor
1Nos*10m/32.8ft standard hose with single clip-on open type chuck
1400mm/55.1″ grey mounting stell stand base-Supplied separately


VMC 110/111

7″ Mobile Data Terminal with ARM® Cortex®-A9 platform

Main Feature

  • 7″ 1024 x 600 TFT LCD monitor with resistor touch screen
  • ARM® Cortex®-A9 Dual Core Processor with 1GHz frequency
  • Compact and fanless design
  • On screen F1 ~ F5 programmable function keys
  • Linux and Android operating system
  • GPS/Wi-Fi/3G/LTE supported (Dead Reckoning included)
  • iButton & RFID for ID identification
  • Dual CAN Bus 2.0B
  • OBDII (ISO15765-4)/SAE J1939 protocol
  • Wide Range DC input from 9 ~ 36V
  • SW Utility for function demonstration on Android platform
  • CE/FCC/Emark



VMC 110/111, a 7-inch all in one mobile data terminal , targets the fleet management, transportation and logistic applications. Its compact and rugged design with flexible expansion capability is perfect to the limited space on the driver cabinet and strog requirement on the wireless communication. For wireless communication, VMC110/111 is capable of supporting GPS, Dead Reckoning, Wifi, 3G and LTE. Besides, VMC 110/111 works on the both of Android and Linux operating systems, which are the main stream of operating system in the future. 7″ 1024 x 600 resolution with 500nits brightness and resistive touch is suitable on the driver cabinet. Abundant I/O support, such as 2 x CAN bus 2.0B, OBDII/J1939, RS232, RS485, USB, GPIO, LAN… can help to get real-time vehicle information and connect with different sensors or equipment, such as ticketing machine, RFID scanner….. VMC 110/111 with Android and Linux platform is no doubt suitable to implement into various truck, forklift, crane… in port, transportation and logistic application.


VMC 3020

10.4″ Rugged Vehicle Mount Computer with Intel Atom® x5-E3930 processor, Touchscreen and IP65

Main Feature

  • 10.4″ XGA TFT LCD monitor with 5-wire resistive touch
  • Aluminum die-casting and fanless design
  • Built-in Intel Atom® x5-E3930 processor, 1.8GHz
  • Automatic/manual brightness control
  • Touch with heater supported
  • On screen F1 ~ F10 programmable function keys
  • Powered USB and COM (5V/12V, 1.5A) for accessories
  • Military standard for vibration and shock
  • UPS Battery supported
  • iButton and RFID for ID identification
  • Wide range DC input from 9V~60V DC in
  • Sunlight readable capability: 1,200nits LCD brightness
  • Operating system: Windows and Linux
  • CE/FCC/EMark



VMC 3020, 10.4-inch all in one robust vehicle mount computer, is designed for the warehouses, logistic and material handling market. It implements the latest Intel Atom® x5-E3930 processor (codename Apollo Lake) and can work on Windows and Linux for different OS. markets. To work well in the special warehouse application, VMC 3020 specially designs powered I/O (up to 12V DC out) to power on printer, scanner… Besides, heater inside VMC 3020 can help forklift resume to work quickly when it stays in snow for a long time. Back-up battery can assist system without stopping working if power battery in forklift suddenly drops down. 1,200 nits brightness is for sunlight readable purpose.